AIS-CTRX Class B AIS Transponder Manual
Indicators:
Power, TX timeout, status, pre-set (Safety Related
Message) SRM sent.
Operator Controls:
Optional pre-set safety related message SRM)
transmit button (Not implemented)
Standards
This product complies with all the necessary standards under the European R&TTE directive for
Article 3.1(a), 3.1(b), 3.2 and 3.3(e). The following standards have been followed in pursuance of this:
IEC62287-1: 2006-03 Maritime navigation and radiocommunication equipment and systems – Class B
shipborne equipment of the automatic identification system (AIS) – Part 1: Carrier-sense time division
multiple access (CSTDMA) techniques
IEC60945: 2002-08 Maritime navigation and radiocommunication equipment and systems – General
requirements – Methods of testing and required test results
IEC61162-1: Maritime navigation and radiocommunication equipment and systems – Digital interfaces
– Part 1: Single talker and multiple listeners
IEC61108-1: GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) – Part 1: Global positioning
system (GPS) -Receiver equipment - Performance standards, methods of testing and required test
results
EN 301 843-1 v2.1: Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 1:
Common technical requirements
EN 50383: 2002 Basic standard for calculation and measurement of electromagnetic field strength and
SAR related to human exposure from radio base stations and fixed terminal stations for wireless
telecommunications system (110MHz – 40GHz)
EN60950-1:2002 Information technology equipment – Safety – Part 1: General requirements
Declaration of Conformity
True Heading AB declares that this product is in compliance with the essential requirements and other
provisions of the R&TTE directive 1995/5/EC.
The product carries the CE mark, notified body number and alert symbol as required by the R&TTE
directive
The product is intended for sale in the following member states:
1.1E 18 LD2103