4
manually, so as to prevent it from being overwritten by loop recording.
” will appear on LCD display.
Mode button
The device has only two modes, video mode and playback mode.
When this button is pressed during standby, the device will switch between these two modes.
When the device is recording, the button is not functional.
Up button
In video mode, press this button to turn on / off LCD display.
In menu settings, press this button to move up.
OK button
In video mode, press this button to start / stop recording.
Down button
In video mode, press this button to start / stop voice recording.
In menu settings, press this button to move down item.
Audio switch
This button is only for speed camera detector.
Push this switch to turn on / off the voice of the speed camera detector.
To Next Page
Loading...
