Trueshopping
www.TrueShopping.co.uk
Page: 19 of 42
6. Using the plug spanner/screw driver combination, turn
the nut anti-clockwise until it comes off. It should be quite
easy and take less than two turns.
7. Take off the nut and the top part of the bicycle bell like
object (it is round like a very small saucer) and keep the
both safe as you will need them for the brush cutter. You
will need to replace them when putting the strimmer in
storage.
8. Remove the Allan key keep it handy to attach the
protective cover. Return the other tools to your tool kit.
9. Put on protective gloves and then
attach the cutting blade to the handle using
the plug spanner/screw driver combination.
Ensure that the blade is firmly and evenly
placed on the spindle.
10. Place the protective cover onto the
four spindles now showing and then replace the small
nuts using the Allan key. Attach securely.
11. Test to check that everything is secure.
12. You are now ready to use your brush cutter.
To Next Page
Loading...
