Trueshopping BC1E34F - Page 36

Trueshopping
www.TrueShopping.co.uk
Page: 36 of 42
Possible cause
Solution
Engine starts and is stalled immediately
Incorrect idle adjustment
Contact the customer service
Tool does not work with full power
Machine overloaded
Do not press down excessively
during use.
Cutting thread too
short/broken
Follow up the cutting thread.
Cutting blade dull or damaged
Have it sharpened in a
specialised workshop or
replace it.
Device overloaded as grass too
high
Trim the grass in several
passes.
Air filter contaminated
Clean or replace the air filter.
Carburettor incorrectly
adjusted
Contact the customer service.
Silencer blocked
Clean the outlet of the silencer.
Strimmer fibre is not coming out
No more thread on the spool
Replace the thread spool.
Cutting thread entangled.
Recoil the cutting thread.