EasyManua.ls Logo

Truma Boiler - Cycle Racks; Caravan Motor Movers

Truma Boiler
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FITTED EQUIPMENT
182
Cycle racks
The Swift Group allows the fitment of a two
cycle rack to our caravans and we have made
provision for fixing blocks on most models for
this purpose.
Due to the complex nature of a cycle rack,
the different models available and the need
to break into the habitation box (therefore,
having a potential of a leak), we suggest
this modification only be carried out by a
competent person, ideally, a Swift Group
dealer or Authorised Repairer.
Please be aware a cycle rack can not be fitted
onto a model where there is a rear escape
window. Please confirm this with your Swift
Group Dealer.
Caravan motor movers
The design and fitment of a caravan motor
mover shall be in accordance with the NCC
Code of Practice 305 and you should ensure
you receive a signed installation certificate of
compliance from the installer.
Failure to do so may invalidate
your warranty
CYCLE RACKS

Table of Contents

Related product manuals