Need help?Do you have a question about the TruSens Z-2000 and is the answer not in the manual?
General| Timer | Yes |
|---|---|
| Noise level | 64 dB |
| Air purify rate | - m³/h |
| Number of speeds | 4 |
| Noise level (low speed) | 33 dB |
| Timer duration (maximum) | 12 h |
| Timer duration (minimum) | 2 h |
| Suitable for room area up to | - m² |
| Placement | Floor |
| Control type | Touch |
| Display type | LCD |
| Product color | White |
| Filtering capability | Allergens, Dust mites, Pollen |
| Power consumption (max) | 28 W |
Weight and Dimensions| Width | 223 mm |
|---|---|
| Height | 567 mm |
| Weight | 4000 g |
Essential safety guidelines for proper appliance use and storage.
Instructions for optimal positioning of the air purifier and SensorPod.
Basic steps to connect and activate the air purification unit.
Connecting the SensorPod to begin air quality monitoring.
Controls for operation, fan settings, dimmer, and timer functions.
Steps to safely open the purifier to access the filter compartment.
Procedure for replacing the main HEPA filter unit.
Procedure for safely replacing the UV sterilization lamp.
Solutions for purifier not turning on, Auto Mode issues, or SensorPod blinking.
To Next Page
