18
10
9
8
7
11
12
Electrical service to the model BR/BC trutankless water heater must be in accordance with all applicable
national electric safety codes, state/provincial and local electric and building codes.
NOTE: Bollente recommends you place the unit near the electrical service panel. A licensed contractor can help
you choose the unit location and which chassis electrical access point is best suited for your installation.
Place the unit where it will not be struck by objects and away from other sources of heat.
Install the unit where it can be mounted at eye level to allow easy access to the touch screen display for reading
and programming controls.
The unit must be mounted to wall studs or other structural member, or with wall anchors appropriate for the
type of wall surface and suicient to securely hold forty pounds if there is no convenient structural member
available.
WARNING: Failure to comply with this requirement may result in the unit falling from the wall, creating the
possiblity of personal injury or death.
trutankless electric water heaters are designed for a very long service life, but actual life expectancy will be
directly aected by water quality and use. If you do not already know the quality of your water, we advise
testing (your water department may be able to assist). Especially in areas where the water hardness exceeds
180 PPM or 10.5 grains/gallons, installing a non-salt based soener or polyphosphate in-line filter may
prolong the life of your unit.
The commercial version of the water heater is generally used in hotel, swimming pool and other places of large;
The commercial version of the water heater for shower use, set the temperature too high, there is a risk of burns;
To Next Page
Loading...
