8
CONNECTIONS
CONNECTING A TV ANTENNACONNECTING A TV ANTENNA
CONNECTING A TV ANTENNACONNECTING A TV ANTENNA
CONNECTING A TV ANTENNA
To view television channels correctly, a signal must be received from one of the
folloiwing sources:
- An indoor or outdoor aerial antenna
- A cable television network
- A satellite network
Note:Note:
Note:Note:
Note:
For receiving over-the-air TV broadcasts, we recommend that you use an
external fixed antenna. Should you require the use of a temporary antenna,
please ensure that you purchase an antenna, with sufficient ability to receive
in weak signal areas. Only when you are in close proximity to a transmitter will
a temporary antenna reproduce a signal as strongly as a fixed antenna.
TV Antenna,
CATV cable to
ANT IN terminal
(not included)
CONNECT THE POWER CORDCONNECT THE POWER CORD
CONNECT THE POWER CORDCONNECT THE POWER CORD
CONNECT THE POWER CORD
• Be sure the AC power cord is disconnected and all functions are off before
making connections.
• Make sure that all the components are connected correctly.
••
••
•
To prevent electrical shock, match wide blade of plug to wide slot, fully insert.To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
To prevent electrical shock, match wide blade of plug to wide slot, fully insert.To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
• When you are not going to use the Unit for a long period of time, disconnect
the power cord.
To Next Page
Loading...