1.1 Product Specification
The printer offers the following standard features
Direct thermal printing (receipts & partial label)
Black mark reflective sensor
3 operation buttons (On/off, feed/pause, and cover-open buttons)
5 LEDs: 1 for printer states (green or red); 3 for Battery capacity (green or orange); 1 for RF status (blue or green)
Audible alert Programmable buzzer
Mini type USB 2.0 (High speed mode)
32-bit RISC high performance processor
Eltron® EPL, Epson® ESC-POS, and Zebra® ZPL emulation languages support
Fonts and bar codes can be printed in any one of the four directions (0, 90,180, 270 degree)
8 alpha-numeric bitmap fonts
One Monotype Imaging® CG Triumvirate Bold Condensed scalable font
Built-in Monotype True Type Font engine
Downloadable fonts from PC to printer memory
Downloadable firmware upgrades
Text, bar code, graphics/image printing (Please refer to the TSPL/TSPL2 programming manual for supporting code page)
BITMAP,
BMP,
PCX
(Max. 256 colors graphics)
Code128 subsets A.B.C,Code128UCC, EAN128,
Interleave 2 of 5,Code 39,Code 93, EAN-13,
EAN-8, Codabar, POSTNET, UPC-A, UPC-E,
EAN and UPC 2(5) digits add-on, MSI,
PLESSEY, China Post, ITF14, EAN14, Code 11,
TELPEN, PLANET, Code 49, Deutsche Post
Identcode, Deutsche Post Leitcode, LOGMARS
CODABLOCK F mode, DataMatrix,
Maxicode, PDF-417, Aztec, MicroPDF417,
QR code, RSS Barcode (GS1 Databar)
To Next Page
Loading...
Need help?
General
