TSC PEX-2000 Series - Page 10

8
Media wound type
Outside wound
Media width (Label and
Liner)
6-INCH: 50.8mm ~ 180mm (2“ ~ 7.09“)
Media thickness (Includes
liner, if any)
Standard (Default):
0.076 mm ~ 0.305 mm (2.99 mil ~ 12.01mil)
RFID Tag:
0.076 mm ~ 1.2 mm (2.99 mil ~ 47.2mil), lift up the front gap sensor wall when
thickness > 0.9mm
Label length (peel-off mode)
6-INCH:
25.4mm ~ 152mm (1” ~ 6”)
Label exit angle (peel-off
mode)
Angle adjustable: 15°
Media Pull-in/pull out force
⚫ The maximum unwind force: 940g
⚫ The maximum rewind force: 1,840g
The pulling forces in the label web must be applied evenly.
Gap height
Min. 2mm (0.79”)
Black mark height
Min. 2mm (0.79”)
Black mark width
Min. 8mm (0.31”)
RFID
RAIN UHF Passive (GS1 EPC Gen2 v2 / ISO 18000-63)
Fixed Position Antenna Standard
Minimum Label/Tag Pitch 0.625” (15.9mm)
RTC and Buzzer
Standard
Environment condition
Operation: -5 ~ 45°C, 25 ~ 85% non-condensing
Storage: -40 ~ 60°C (-40 ~ 140˚F), 10 ~ 90% non-condensing
Accessories
◼ Quick start guide
◼ USB port cable
◼ Power cord
Dealer option
◼ Wi-Fi 802.11a/b/g/n/ac with Bluetooth 4.2 combo module
◼ GPIO (DB25F)
◼ UHF RFID