TSC PEX-2000 Series - Ethernet

57
5.4.2 Ethernet
Ethernet configures internal Ethernet configuration and checks the printer’s Ethernet module status, and reset the Ethernet module.
Item
Description
Default
Network Interface
Select the network interface by Wi-Fi or Ethernet.
N/A
Status
Check the Ethernet IP address and MAC setting status.
N/A
Configure
DHCP: On or OFF the DHCP (Dynamic Host Configuration Protocol) network protocol.
Static IP: Use this menu to set the printer’s IP address, subnet mask and gateway.
DHCP
Menu Interface Ethernet
Network Interface
Ethernet
Wi-Fi
Status
Configure