TSC PEX-2000 Series - Setting RFID

44
4.8 Setting RFID
Press [RFID] button from Printer Function to enter the RFID menu on TSC Console. Here provides users to set the RFID common
settings, RFID calibration and checking statistics.
Tab
Item
Description
OFF/ ON
Select ON/OFF to enable/disable the RFID encoder module.
OFF/ STOP/
OVERSTRIKE
This menu item selects the error handling mode for RFID failures.
1~10
This menu item selects the number of label retries that the RFID encoder will
attempt before declaring a fault.