TSC PRINTRONIX TTP-225 Series - Loading the Ribbon

7
3.2 Loading the Ribbon
1. Open the printer’s top
cover, insert the robbon
side pmtp the supply
hub then align to the
left.
2. Open the ribbon access cover.
3. Insert the paper core
right side onto the
rewind hub. Align the
notches on the left side
and mount onto the
spokes.
4. Pull the leading ribbon to pass
the print head.
5. Stick the ribbon onto
the ribbon rewind paper
core.
6. Turn the ribbon rewind gear
until the ribbon plastic leader is
thoroughly wound and the
black section of the ribbon
covers the print head. Close
the ribbon access cover and
the top cover.