TSC PRINTRONIX TTP-225 Series - Loading the Media in Peel-Off Mode (Option)

9
3.4 Loading the Media in Peel-off Mode (Option)
1. Install the media then
open the top cover and
peel-off panel after
calibrating the sensor.
2. Lead the media through the
backing paper opening slot
beneath the peel-off roller.
3. Push the peel-off panel
back to the printer.
4. Close the top cover gently,
and press the FEED button
to test.
Note: Please calibrate the
gap/black mark sensor when
changing media.