TSC PRINTRONIX TTP-225 Series - Loading the Media

8
3.3 Loading the Media
1. Open the printer top
cover by pulling the
tabs.
2. Separate the media holders to
the label roll width.
3. Place the roll between
the holders then place
the paper.(printing side
face up)
4. Move the media guides to fit
the label width by turning the
media guide adjuster knob.
5. Hold the top cover and
press the top cover
support to disengage
the top cover support
with lower inner cover.
6. Gently close the top cover.
Make sure the cover latches
securely.