TSC TE300 series - 3.3.4 Loading the Media in Peel-off Mode (TE210;TE310 Series only, dealer option)

29
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
6. Reassemble the parts in the reverse
procedures.
3.11 Replacing the Print Head Open Sensor Assembly
1. Please refer to the section 3.1 to
remove the print engine.
2. Disconnect the three screws to
remove the right side lower cover.
3. Remove the print head open sensor
by disengage the screw and cable
(black) as indicated.
Screws