Need help?Do you have a question about the TSC TDP-247 and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Communication Interface | USB 2.0, RS-232 |
| Power Supply | 100-240V AC, 50/60 Hz |
| Operating Temperature | 41°F - 104°F (5°C - 40°C) |
| Operating Humidity | 85% non-condensing |
| Max. Print Width | 4.09" (104 mm) |
| Label Width | 1.18" - 4.33" (30 mm - 110 mm) |
| Storage Temperature | -40 ~ 60°C (-40 ~ 140°F) |
Procedure for unpacking and inspecting the printer upon receipt.
List of all items included in the printer package.
Identifies components visible on the front of the printer.
Identifies components visible on the rear of the printer.
Step-by-step instructions for initial printer setup.
Guide for properly loading label rolls into the printer.
Instructions for installing the optional peel-off module.
How to load labels when using the optional peel-off module.
Procedure for attaching and using an external label roll mount.
Instructions for installing the optional cutter module.
Guide for loading labels when the cutter module is installed.
Steps to launch and begin using the diagnostic utility.
Details on printer functions available within the diagnostic tool.
Configuring Ethernet connection via USB interface.
Configuring Ethernet connection via RS-232 interface.
Configuring Ethernet connection via Ethernet interface.
Calibrating the gap or black mark sensor for accurate media detection.
Performing sensor calibration, self-test, and entering dump mode.
Restoring printer settings to factory defaults.
Configuring and calibrating the black mark sensor as the media sensor.
Configuring and calibrating the gap sensor as the media sensor.
Option to interrupt the AUTO.BAS program during power-on.
Methods and tools for cleaning printer components.
Interpreting LED indicators and their corresponding printer statuses.
Diagnosing and resolving issues related to print quality.
Description of LED colors and their meanings.
Explanation of how to use the printer's button for various functions.
To Next Page
