TSC TDP-247 User Manual

47 pages

To Next Page

To Previous Page

Dump mode

Printer will enter dump mode after printing printer configuration. In the dump mode, all

characters will be printed in 2 columns as following. The left side characters are received

from your system and right side data are the corresponding hexadecimal value of the

characters. It allows users or engineers to verify and debug the program.

Dump mode printout

Note：

Turn off and on the power switch to reset the printer for normal printing.

Other manuals for TSC TDP-247

Need help?

Do you have a question about the TSC TDP-247 and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Communication Interface	USB 2.0, RS-232
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	41°F - 104°F (5°C - 40°C)
Operating Humidity	85% non-condensing
Max. Print Width	4.09" (104 mm)
Label Width	1.18" - 4.33" (30 mm - 110 mm)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)