Operation 7
DATA LOGGING
Measurements
Measurements to be logged are independent of measurements on the
display, and must therefore be selected under DATA LOGGING Æ
Measurements.
Log Mode/Log Settings
You can set Log Mode to Manual, Auto-save, Cont-key, or Cont-time.
• Manual mode does not automatically save data, but instead prompts
the user to save a sample.
• In Auto-save mode, the user manually takes samples that are
automatically logged.
• In Cont-key mode, the user starts taking readings and logging by
pressing the key. The instrument will continue taking
measurements until the key is pressed again.
• In Cont-time mode, the user starts taking readings by pressing the
key. The instrument will continue taking samples until a set period
of time has passed.
• Auto-save, Cont-Key and Cont-time modes have the following
additional Log Settings:
Mode
Log Settings
Auto-save Log Interval
Cont-key Log Interval
Cont-time Log Interval
Test Length
• Pressing the
ST keys simultaneously will lock the keypad to
prevent unauthorized adjustments to the instruments. To unlock the
keypad, press the
ST keys simultaneously.
Delete Data
Use this to delete all data, delete test or delete sample.
% Memory
This option displays the memory available. Delete All, under Delete
Data, will clear memory and reset the memory available.
APPLICATIONS
You can choose % Outside Air in the Applications menu. After choosing
this application, take measurements or enter data for each line.
To Next Page
Loading...
Need help?
General
