To Next Page

To Previous Page

Device information is also available via the digital interfaces. This

includes SN, model number, calibration date, the current status of all

device options, and calibration gas.

See Appendix C

for complete command set.

All models are RS-232 Bi-directional Interface

Type: 38,400 baud, 8 bit, no parity, 1 stop bit, no flow control.

This meter can be connected to a RS-232 port of a computer by

connecting a 9 pin female D-Sub to the cable. Note that you still need

to provide power separately through the black and green wires.

TSI Instruments 4100 Series User Manual

Questions and Answers: