TST TM-507 - Additional Functions; Swap Tire Sensor Positions; Set ID Truck (Three Digit ID Identifier); Set ID Trailer (Three Digit ID Identifier)

ADDITIONAL FUNCTIONS
18
TST-Doc-507FT-RV WSD-C Manual-(D)
Set ID Truck (Three Digit ID Identifier)
Ÿ Press andholdthe "SET" button until the display beeps, then release.
Ÿ Press the (+) button 8 times until "SET ID TRUCK" appears.
Ÿ Press the "SET" button to enter that mode.
Ÿ Press "SET" again, the first digit will blink.
Ÿ Use the (+) or (-) buttons to set the first digit. Press "GO" to move to the next
digit.
Ÿ Again, press the (+) or (-) buttons to select the next digit. Continue forthefinal
(3rd)digit.
Ÿ When done, push the "SET" button to save.
Ÿ Push the "BACK" button twice to get back to the Main Screen.
Swap Tire Sensor Positions
Ÿ Pressandholdthe "SET" button until the display beeps and then release.
Ÿ Press and release the (+) button 7 times until "TIRE " appears. Press "SET".
Ÿ Use the (+) or (-) buttons to select the tire sensor code you want to swap.
Ÿ Press "SET" and then select the tire you want to swap the code to using the (+)
or (-) buttons.
Ÿ Press "SET" to move the sensor code to the new tire.
Ÿ Press the "BACK" button twice to get back to the Main Screen.
Set ID Trailer (Three Digit ID Identifier)
Ÿ Pressandholdthe "SET" button until the display beeps, then release.
Ÿ Press the (+) button 9 times until "SET ID TRAILER" appears.
Ÿ Press the "SET" button to enter that mode.
Ÿ Press the "GO" button to select the trailer (1-4) to set the ID.
Ÿ Press "SET" again, the first digit will blink.
Ÿ Press "GO" to go to the first digit on the trailer section on the screen.
Ÿ Use the (+) or (-) button to set the 1st digit. Press "GO" to select the next digit.
Continue for the final (3rd) digit.
Ÿ Press "SET" to save the 3 digit code. To select the next trailer, press the "GO"
button.
Ÿ When done, press the "SET" button to save.
Ÿ Push the "BACK" button twice to get back to the Main Screen.