EasyManua.ls Logo

TST TM-507 User Manual

Default Icon
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Wireless Tire Pressure and Temperature
Monitoring System Instruction Manual
Model#: TM-507 Wide Screen Display
507 Flow-through and Cap Sensors
Thank you for purchasing a TST Tire Pressure Monitoring System(TPMS).
With minimal care, your new TPMS will provide reliable
service for many years. Please read and understand
the information contained within this manual.
Keep this manual for future reference.
TST-Doc-507FT-RV WSD-C Manual-(D)
Telephone: 770.889.9102
Website: www.TSTtruck.com
Question and Answer IconNeed help?

Do you have a question about the TST TM-507 and is the answer not in the manual?

TST TM-507 Specifications

General IconGeneral
BrandTST
ModelTM-507
CategoryAutomobile Accessories
LanguageEnglish

Summary

System Components in Kit

Programming Sensor Codes into the Display

Automatic Code Learning

Pressure Coding

Manual Coding

Sensor Installation - Flow-through Sensor

Sensor Installation - Cap Sensor

Display Installation

Display Buttons

Parameter Settings

Pressure Parameters

Configure the pressure units (PSI or BAR) for the TPMS display and alarms.

Temperature Parameters

Set the temperature units (°F or °C) for the TPMS display and alarms.

High Temperature Alarm Settings

High Pressure Alarm Settings

Low Pressure Alarm Settings

Restore Parameters to Factory Default Settings

Display Alerts

High Pressure Alert

Alert for tire pressure exceeding the high-pressure threshold.

Low Pressure Alert

Alert for tire pressure dropping below the low-pressure threshold.

High Temperature Alert

Alert for tire temperature exceeding the high-temperature threshold.

Fast Leak Alert

Sensor Low Battery Alert

Backlighting and Motion Detection

Disconnecting and Reconnecting a Vehicle

Trailer Selection

Charging the Display

Replacing the Flow-through Sensor Battery

Replacing the Cap Sensor Battery

Additional Functions

Swap Tire Sensor Positions

Procedure to change the assigned position of a sensor in the display.

Set ID Truck (Three Digit ID Identifier)

Assign a three-digit identifier to the towing vehicle sensors.

Set ID Trailer (Three Digit ID Identifier)

Assign a three-digit identifier to trailer sensors.

Troubleshooting Tips

Common Questions

Repeater

Specifications

Sensor Specifications

Technical details for the tire pressure sensors, including operating ranges and dimensions.

Display Specifications

Technical details for the display unit, including operating ranges and dimensions.

Related product manuals