Logic Output (PL310QMT)
Output Voltage: Fixed 5V ± 0.1V
Output Current: 0 to 1.5 Amps
Output Terminal: 4mm terminals on 19mm (0.75") spacing
Output Protection: Output will withstand up to 16V forward voltage. Diode clamped for
reverse voltages and up to 3 Amps reverse current.
Load Regulation: <0.3% for 50% load change
Load Regulation: <0.1% for 10% line change
GENERAL
Power Requirements:
Input Voltage: Internally set for 110, 120, 220 or 240VAC 50/60Hz
Input Voltage Range: ± 10% of voltage setting
Power Consumption:
Single Dual Triple
30V/1A 75VA 150VA 150VA
15V/4A or 30V/2A 150VA 300VA 375VA
30V/3A 250VA 500VA 600VA
Environmental Operating Range: 5°C to 40°C, 20% to 80% RH
Environmental Storage Range: -20°C to +60°C
Weight:
Single Dual Triple
30V/1A 4.0kg 8.0kg 8.5kg
15V/4A or 30V/2A 5.0kg 9.5kg 11.5kg
30V/3A 6.0kg 12.0kg 15.5kg
Size: 155 mm wide x 170mm high x 265/300mm deep (single)
350mm wide x 170mm high x 265/300mm deep (dual)
425mm wide x 170mm high x 265/300 mm deep (triple)
Electrical Safety: Designed and manufactured to comply with IEC 348
EMC: Designed and manufactured to comply with EN50081-1/EN50082-1.
5
To Next Page
Loading...
