TTI TCB-660 - CE Declaration; Safety Precautions and Requirements; Power Cable and Antenna Safety

ENGLISH
11. CE Declaration
This unit can be used without license and charges in; Austria,
Belgium, Denmark, Finland, France, Germany, Great Britain,
Greece, Italy, Luxemburg, Netherlands, Portugal, Spain,
Sweden, Switzerland
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands and/or may
be subject to licensing conditions in the country of use.
Be sure to check that you have the correct version of this
radio or the correct programming of this radio, to comply
with your national licensing requirements.
CE versions of the TCB-660 which display the
CE symbol on the product label, comply with the
essential requirements of the European Radio
and Telecommunication Terminal Directive
1999/5/CE.
13
TCB-660
12. Safety Requirement
The same colors are present on the battery and in the fuse box
of the car.
* Red : Positive pole (+)
* Black : Negative pole (-)
The power cable is for 13.2V DC only. Be sure the transceiver
is off before connecting the leads of the power cable to the
power supply. It is important to observe the polarity even if the
unit is protected against the accidental inversion :
The unit must be wired for the negative ground only.
To avoid damage, do not operate your CB radio without
connecting a proper antenna.