9
Please, check if your radio is programmed with the channel
selection function. For more details, you may ask your dealer.
3. Press and hold down the PTT button, and speak clearly
to the microphone from a distance of around 2.5~5cm.
to return to the receiving mode.
3. Select a desired channel
You can receive a message only when the other party‘s channel
and sub-tone code are the same as you have with your radio.
At the following conditions, you can directly communicate
with the other party by using the talk-around function.
• In case that a repeater is not activated.
• When you are out of the repeater range.
To operate on/off function of talk-around, your dealer
must program a side button for the
If you hear the positive beep when you press the repeater/
talk-around button, your radio is not using the repeater.
On the contrary, if you hear the negative beep, your radio
To Next Page
Loading...