TTI TX-446 - Receiver Specifications; CE Declaration; Safety Requirements and Warnings

14
english
• Receiver
Sensitivity
@ 12dB SINAD (EIA) : 0.25uV typ.
@ 20dB SINAD (ETS) : 0.60uV typ.
Adjacent Channel Selection :
- 60dB @ 12.5kHz
Intermodulation :
70dB (EIA), 65dB (ETS)
Spurious Rejection :
70dB (EIA)
Hum and Noise :
-45 dB @ 12.5kHz
Rated Audio Output :
400mW typ. @ 5% distortion
Audio Distortion :
3%
Conducted Spurious Emission :
57dBm < 1GHz
CE Declaration
CE Version of the TX-446 which Display
the “CE“ symbol on the product label,
complies with the essential requirements
of the European Radio and Telecommuni-
cation Terminal Directive 1999/5/CE.
This warning symbol indicates that this
equipment operates in non-harmonized
frequency bands and /or may be subject
to licensing conditions in the country of
use. Be sure to check that you have the
correct version of this radio or the correct
programming of this radio, to comply with
national licensing requirement.
Safety Requirement
For charging the battery, only CE-approved AC adaptors
must be used for the charger cradle in compliance with the
following specifications:
* OUTPUT : DC 14V 150mA
0682