23
Computer Continuous Sending Mode (C18=4)
, , CR LF
{
{
{
S 1 S 2 S 3 Data S 4
S1: weight status, ST=standstill, US=not standstill, OL=overload
S2: weight mode, GS=gross mode, NT=net mode
S3: weight of positive and negative, “+” or “-”
Data: weight value, including decimal point
S4: “kg” or “lb”
CR: carriage return
LF: line feed
PC or Remote Display Continuous Sending Mode
(C18=5)
<STX>
<POL>
XXXXX.XX
<L/K>
<G/N>
<ST
A
T>
<CR>
<LF>
Start
Transmission
Polarity:
<SP> = Positive
“-” = Negative
Weight Data
Units:
lb = punt
kg = kilogram
pcs = pieces*
Gross/Net:
GR = Gross
NT = Net
Carriage
Return
Line Feed
Status:
<SP> = Valid
M = Motion
O = Over/under range
Print to Adhesive Label Printers (C18=5) & (C18=6)
The following are the printing formats:
Date: 05/01/2017
Time: 11:30:52
Net: 25.6lb
Tare: 10.3lb
Gross: 35.9lb
Date: XX.XX. XX (yy.mm.dd)
Time: XX.XX.XX (hh.mm.ss)
NET 6.00kg (net weight)
TARE 2.88kg (tare)
GROSS 8.88kg (gross weight)
Tufner Label Printer Zebra Label Printer
To Next Page
Loading...
Need help?
General
