Tunturi Aircycle E603 - Maintaining Your Aircycle.15

MAINTAINING YOUR AIRCYCLE
The Tunturi Professional Air-
cycle requires very little mainte¬
nance. Be sure to clean your cycle
with a damp cloth or towel after
each workout.
If you have any problems while
performing maintenance on your
cycle, consult an authorized ser¬
vice representative.
LUBRICATING THE CHAINS
To ensure that your cycle will
continue to operate correctly, you
need to oil the chain once a year.
1. R emove the left pedal crank
assembly.
a. Use a 10 mm open-end
wrench to turn the bolt at the
base of the crank clockwise
to loosen.
b. Remove the cotter pin and
pull off the crank. It may be
necessary to gently pound
the bolt-end of the cotter pin
to slide it out.
2. Remove the left side cover from
the front frame.
a. Use a Phillips-head screw¬
driver to remove the six
Phillips-head screws.
b. Remove the left cover.
3. Lubricate the chain.
Use a few drops of household
lubricant or aerosol spray and
wipe off any excess oil.
4. Turn the pedal to advance the
chain until the entire chain is
lubricated.
5. Reassemble the left cover, and
left pedal crank assembly.
15