Tunturi j8f - Page 32

1 103 4034 Frame 1
2 233 4018 User interface (incl. 4) 1
* - M5x12 DIN 912 Screw 6
3 173 4057 Meter lower cover 1
- KB 40x12 WN-1441 Screw 6
4 233 4020 Membrane 1
*8 543 4036 Hand rail bracket, pair J6 1
* - M8x25 DIN 7991 Screw, hand rail J6 2
9 103 4037 Front support J6F 1
* - M8 DIN 137A Washer J6F 2
* - M8x80 DIN 912 Screw J6F 2
10 103 4035 Rear support J6F 1
11 643 4004 Spring J6F 2
- M6x25 DIN 912 Screw J6F 2
*13 533 1029 Wheel,(*2 pcs J6) 6
*14 673 500 88 Snap locking (* 2 pcs J6) 10
15 533 4006 Stand foot, pair 1
- M5 DIN 9021 Washer 2
- M5x14 DIN 7985 Screw 2
16 203 4023 Hand rail, R (incl.18) J6 1
- 203 4025 Hand rail, R (incl. 18) J6F 1
17 203 4024 Hand rail, L (incl.18) J6 1
- 203 4026 Hand rail, L (incl. 18) J6F 1
18 213 4007 Handle grip, pair 1
*25 523 4034 Sleeve J6 2
* - M8x80 DIN 912 Screw J6 2
* - M8 DIN 985 Nut nylon J6 2
29 403 4054 Safety switch 1
*31 403 4055 Safety key 1
32 103 4033 Lift arm 1
- M8x20 ISO 7380 Screw 2
- M8 DIN 125 Washer 2
33 523 4033 Sleeve 2
35 813 4020 Lift motor 1
36 523 4032 Roller, rear 1
- M8x50 DIN 912 Screw 2
37 523 4031 Roller, front 1
- M8 DIN 125 Washer 2
- M8x30 DIN 931 Screw 2
38 533 4010 Rubber sheet 2
39 513 4002 Belt tightener frame(incl.40) 1
40 343 4010 Axle 1
- 8 DIN 471 Retaining ring 1
- M8 DIN 934 Nut 1
- M8x40 ISO 7380 Screw 1
41 533 4040 Rubber bumper ( 2pcs USA) 6