Turbo Eco-Net 128 - General Features

U s e r I n s t r u c t i o n s
Eco-Net 128 Control Unit
4
TURBO s.r.l. Dust Filter Components
Via Po 33/35 20811 Cesano Maderno (MB) Italy Tel ++39 0362 574024 Fax ++39 0362 574092
InMn 26 UCESTD
Rev.1.02 it
General features
Power supply voltage
100÷240Vac 50-60 Hz
Optional: 24Vac/Vdc ± 10 %
Electric consumption (with Ton max=10sec)
25W at max load
(35W per 24Vac/Vdc IN)
Protection fuse
1A (100÷240Vac IN)
3A (24Vac/Vdc IN)
Operating temperature
-10 °C - 55 °C
Storage Temperature
-20 °C - 60 °C
Environmental humidity
0 ÷ 95% Rel. (Non Condensing)
Pressure Transducer
0 ÷ 10Kpa (max 40Kpa) (*)
Maximum pressure applicable
50KPa – 0.5 bar
High pressures
damage the device
Pulse Time (valve opening)
50msec ÷ 5sec
Pause time (interval between valves opening)
1sec ÷ 7200sec
Proportional output 4 ÷ 20 mA
1x 4÷20mA current Loop
(self-powered)
Alarm Relays
2 N.C. (voltage-free contact)
24Vac/dc 5Amp (**)
Display
Monochrome graphic LCD
B/N 128 x 64 Pixel.
Casing
ABS base
Polycarbonate Lid
Protection rating from water and dust
IP65 (DIN EN 60529)
Shock resistance
IK08/07 (8 Joule) (En62262)
Flammability
(UL746C 5): UL 746C 5V
Resistance to UV rays
UL508
Seals
EPDM and polyurethane
Colour
RAL 7035
Overall weight
1.1 Kg
Note(*):
Higher pressures may damage the transducer Do not connect clogging measuring tubes to
the compressed air circuit.
Note(**):
For 230Vac 5Amp relay contacts, request the optional “Piggy-back 2 RELAY” board