turbofan EC40D5 User Manual

15
OPERATIONS
7 • SELECTING AND STARTING A RECORDED PROGRAMME
7.1 • TURNING THE OVEN ON
Press knob 1 for 3 seconds. If an error
code appears on displays 7-8, see “Section
22 - Self-Diagnosis and Error Guide".
7.2 • RECALLING
Press Recipe button 11, the display will read
[L01].
Turn knob 1 to select the programme
number you'd like to recall, which will be
shown on display 7.
7.3 • START
7.4 • STOPPING COOKING IN PROGRESS
To manually stop cooking in progress, press
the active cooking button (fixed led light)
for 3 seconds.
Once cooking has stopped, the cooking
mode leds will begin to flash (2 - 3 - 4).
To exit the menu press button 11.
Viewing and changing saved values
If it becomes necessary to check the set
values during cooking, press button 11, the
displays will flash.
Wait 10 seconds for the real values to
reappear.
If you wish to view the settings of the
subsequent phases, press button 1 and
turn the knob until the desired phase
appears on the display.
7.3 a •
STARTING A PROGRAMME WITH
PRE-HEATING
Press the cooking mode button
with fixed led light to start pre-
heating, display 8 will read [PrE].
A cyclical acoustic signal will be
heard and the writing [LoA] will
appear on the display to notify
that the chamber has reached
temperature.
Insert the food (if the programme
has core probe phases, insert
the probe into the product).
Close the door.
Button 11 will show a second
flashing LED (2) to indicate the
activation of cooking cycle 2.
7.3 b •
STARTING A PROGRAMME
WITHOUT PRE-HEATING
Insert the food (if the programme
has core probe phases, insert
the probe into the product).
Start cooking by pressing the
cooking mode button with fixed
led light. Press button 11 for 3
seconds or press button 9, the
display will read [0.00] and then
press button 9 again.
An acoustic signal and the
flashing LED 2 on button 1
indicates that the pre-heating
cycle is not included.
Warning: pre-heating is not
necessary only when the
cooking chamber has already
reached temperature.
7.3 c •
STARTING A RECORDED
PROGRAMME WITHOUT PRE-
HEATING
Insert the food (if the programme
has core probe phases, insert
the probe into the product).
Start cooking by pressing the
cooking mode button with fixed
led light.
240066-1

turbofan EC40D5 Specifications

General

Brand	turbofan
Model	EC40D5
Category	Oven
Language	English