34
22 • SELF-DIAGNOSIS AND ERROR GUIDE
ERROR MESSAGE
The main error messages are:
“ doP ”
Door appears open, which means the door micro-switch
contact is open. Make sure the door is closed properly, if
the error persists, call the technical support service.
“ E 7 ”
There is overheating in the electrical components
compartment. The oven can be used under careful
observation until the technical support service intervenes.
“ E 8 ”
There is excessive overheating in the electrical
components compartment, which may compromise the
integrity of components. Immediately turn off the oven
and call the technical support service.
“ E 1 ”
Intervention by motor's thermal protective device.
Immediately turn off the oven and call the technical
support service.
“ E 2 ”
Intervention by cooking chamber safety thermostat.
Immediately turn off the oven and call the technical
support service.
E 1
E 2
E 7
E 8
240066-1
To Next Page
Loading...
