7
2.1 • Before any food is cooked in a new oven,
the interior must be thoroughly cleaned
(See “Section 21.Special Programs -
Manual Cleaning”).
2.2 • At the end of the working day, clean the
oven thoroughly inside and out; this will
ensure smooth operation of the appliance
and prolong its useful life.
2.3 • Do not use high pressure water jets
when cleaning the oven!
2.4 • For daily cleaning, use only alkali based
products suitable for the purpose. Do not
use abrasive materials or products as they
will damage the oven surfaces.
2.5 • Always switch off the appliance when
work is finished, shutting off all utilities
(electricity and water).
2.6 • Avoid any operation that might cause
cooking salt to be deposited on the steel
surfaces of the oven; if salt is accidentally
spilled, rinse off thoroughly without delay.
2.7 • After steam cooking, open the door
carefully to avoid being hit by the rush of
residual steam escaping from the oven.
Failure to observe this warning may be
dangerous for the operator.
2.8 • To ensure safe operation of the oven,
do not obstruct the vents or any other
opening on the oven!
2.10 • Failure to observe basic safety
guidelines may jeopardize the smooth
operation of the oven and expose the
operator to serious danger!
The manufacturer accepts no liability
if the original function of the oven is
altered or there is tampering or failure
to observe the instructions given in the
manuals.
2.12 • Do not use jets of cold water to cool the
oven.
To correctly cool the oven, follow the
procedure indicated in paragraph 3.8
2 • POINTS TO REMEMBER
2.11 • To ensure long term efficiency and
reliability of the oven, scheduled
servicing should be carried out at
least once a year. With this in mind,
customers are recommended to sign a
service agreement.
2.9
• CAUTION
No cooking with alcohol added is
permitted!
!
240066-1
To Next Page
Loading...
Need help?
General
