51 Manchester Series MAN210-FG/MS121/MAN210-HC Rigging Manual
Chapter 9: MV210-VT and MS121-VT Vertical Transporters
9.0.1 Required Components
Item Quantity
MS121 -VT 1
MS121 3 (maximum)
MV210-VT 1
MV210-HC 4 (maximum)
9.0.2 Location
The MS121-VT and MV210-VT vertical transports should be located on a at,
horizontal, and dry surface, capable of supporting the weight of the complete
assembly. The wheels should be locked during the addition of cabinets.
MV210-VT
9.0.3 Measured Weights
Item Quantity Weight
MS215 -VT
1 31.6 kg 69.7 lbs
MV210-VT
1 24.7 kg 54.5 lbs
The MS121-VT allows a stack of up to 3 MS121 subwoofers to be transported and
stored securely, and moved into postion for ying.
The MV210-VT allows a stack of up to 4 MV210-HC cabinets to be transported and
stored securely, and moved into postion for ying.
The MS121 subwoofers are assembled onto the MS121-VT and are secured using
quick release pins.
The MV210-HC cabinets are assembled onto the MV210-VT and are secured using
quick release pins.
The following procedures describes how to assemble the MS121 subwoofers onto
the MS121-VT, and the MV210-HC cabinets onto the MV210-VT.
! WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 4 MV210-HC CABINETS FOR EACH
MV210-VT. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT INJURY
OR DEATH.
! WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 3 MS121 CABINETS FOR EACH MS121-VT.
FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT INJURY OR DEATH.
9.0.4 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting
MS121-VT