Need help?Do you have a question about the turck TBEN-LG EtherNet/IP and is the answer not in the manual?
General| Housing Material | Plastic |
|---|---|
| Protection Rating | IP67 |
| Operating Temperature | -40 to 70 °C |
| Supply Voltage | 24 V DC |
| Communication Protocol | EtherNet/IP |
| Number of I/O Ports | 8 |
| Data Rate | 10/100 Mbps |
| Number of Ports | 2 |
| Port Type | M12 |
| Connection | Ethernet |
Overview of the TBEN-LG series multiprotocol communication adapters.
Lists part numbers for TBEN-LG devices with their specifications.
Details connection pinouts for the TBEN-LG-16DIP device.
Illustrates connection diagrams for TBEN-LG-8DIP-8DOP and TBEN-LG-16DOP.
Provides the connection diagram for the TBEN-LG-16DXP device.
Explains Ethernet port LEDs (LD_P1, LD_P2) and fault indicators (LD_ERR).
Details the states and meanings of the Power LED (LD_PWR).
Describes IO LED status for TBEN-LG-16DIP, -16DOP, -8DIP-8DOP, and -16DXP.
Defines IO data formats for TBEN-LG-16DIP, -8DIP-8DOP, -16DOP, and -16DXP.
Explains setting IP addresses using rotary switches in static mode.
Details IP address assignment via BOOTP/DHCP modes using rotary switches.
Covers IP address configuration using PGM mode (500/600) and the web server.
Guides on using the TURCK IP Address Tool for device IP configuration.
Explains Restore Mode (0) and Factory Reset Mode (900) for device settings.
Steps to configure the EtherNet/IP user interface using RSLinx.
Guide on creating projects, installing EDS files, and creating TBEN modules.
Setting up connection type and data format for TBEN modules in RSLogix.
Explains selection of data formats (INT, SINT, etc.) in module definition.
Details configurable parameters for TBEN digital inputs and outputs.
Describes the structure of configuration data for TBEN-LG devices.
How to view the installed EDS file and device profile information.
Steps to configure TBEN models using generic Ethernet module profiles.
Setting up connection parameters for a generic device configuration.
Opening the web server via IP address and understanding the home page.
Procedure to log in as administrator and navigate web server functions.
Modifying network settings, station configuration via the web interface.
Accessing diagnostics and Ethernet port statistics through the web server.
Changing IO behavior, input inversion, and pulse stretching settings for TBEN devices.
To Next Page
