· 19
SAVE PROGRAM
SAVE
DEC INC
ENT ER
START
＞3 seconds
BATT MEMORY【1】
LiPo 7.4V(2S)
BATT MEMORY【1】
C:4.9A D:2.2A
ENTER CHARGER
LOAD……
next flash
DEC INC
Save the program set by pressing the Start/Enter button for more
than three seconds.
This screen indicate the saved profile.
Once you've saved a charge profile, you can load those settings to
use later. To load a memory, you have to press the Start/Enter Button
for more than 3 seconds. Otherwise you only enter the setting mode.
This screen indicates that the charge profile is being loaded.
BATTERY MEMORY SET
SAVE PROGRAM
ENTER
Turnigy Mega 1000W
To Next Page
