Turtle Beach XP SEVEN - PS3 Audio Configuration

12
Using your XP SEVEN Headset on PS3
PS3 Audio Conguration
1. Go to “Settings”
- Choose “Accessory Settings”
- Choose “Audio Device Settings”
- Choose “Input/Output Device”
- Choose “Turtle Beach XP SEVEN”
2. Adjust microphone levels
1. Go to Settings
- Choose “Sound Settings”
- Choose “Audio Output Settings”
- Choose “Optical Digital”
- Choose “Dolby Digital 5.1 Ch.”
(Disable DTS 5.1)
2. Press X to save
1. Go to “Settings”
- Choose “Sound Settings”
- Choose “Audio Multi Output”
2. Press “X” to save
This allows simultaneous use of analog and
digital/HDMI audio output.
Audio Device Settings
Microphone Level 3
Back
X Enter
OK
Audio Output Settings
Select the connector on the TV or AV amplifier (receiver).
Turn on the power of the connected device.
Cancel
Audio Output Settings
12/14 12:15 PM
0
On
Sets to output audio through multiple connectors
simultaneously. Audio output to connectors that are
not selected in [Audio Output Settings] is downscaled
to 2 Ch.
Sets to output audio through multiple connectors
simultaneously. Audio output to connectors that are
not selected in [Audio Output Settings] is downscaled
to 2 Ch.
Input Device TURTLE BEACH XP SEVEN
Output Device TURTLE BEACH XP SEVEN