To Next Page
B
batesstephanieAug 6, 2025
How to troubleshoot a Tuthill SOTERA 400B Water Pump that won't prime?
- AAmanda RobertsAug 6, 2025
If your Tuthill Water Pump won't prime, there are several potential causes: * A suction line problem: Check the suction line for any leaks. * Leaky check valves: Inspect the check valves for dirt or damage and replace if necessary. * Improperly installed check valves: Ensure the check valves are installed correctly. * A plugged outlet: Check for and clear any blockages. * The motor not operating: Verify the power source. * Stripped or damaged gears: Inspect the gear assembly and drive gear for damage; replace the entire assembly if needed.
General
