1.1 Unpacking:
Turn over the carton to cut the tape from the bottom, then turn over back
the carton to pull up the carton vertically.
1.2 Placement:
Place the machine on the flat ground and make sure all four feet of the
product are in contact with the ground.Items with a height of more
than 5CM shall not be placed within 30CM in front of the product, so as
not to affect the cat identification sensor outside the product.
1.3 Accessories(in litter storage box):
Adapter*1 Manual*1
Garbage bag(45*50mm)*1(roll)
Notice:
Please observe the installation method of garbage bags,
or scan the code below to watch the video.
Adapter
(anti-bite)
Garbage bag
(1 roll)
User manual
User
manual
Notice：
The four feet of the product must be in contact with a firm flat ground！
Place the machine on soft carpet.
Place the two front feet of the machine on the cat litter mat or carpet.
EN EN
ⅠINSTRUCTIONS FOR THE FIRST USE
03 04
To Next Page
Loading...
