3.10 Timing:
3.10.2 Regular clean-up mode
Set the machine to clean regularly in the App“Clean Timing”.
3.10.3 Timing net flavour
Set the machine to remove odor regularly in the App“Deodo Timing”.
4.1 Within 2 minutes of re-powering the product, click the button "➂"
more than 5 times continuously, the product can enter the detection mode.
4.2 In testing mode:
①Click each key to check whether the key works properly.If it works
properly, the PCB hardware is good.
②Press the machine from the top with a force of more than 1kg to see
whether the“Full”indicator flashes.If it does, the gravity sensor is good.
③If the bin mark keeps lighting up, the motor is good.
④If the WiFi mark keeps lighting up, the WiFi hardware is good.
⑤Cover the the infrared sensor at the barrel mouth,if the“Auto” mark
flashes, the sensoris good.
4.3 Re-power on the machine after checking.
Notice:
If the execution time of these scheduled procedures overlap with the DND time, the product will
first perform odor and cleaning, and then return to DND mode.
EN EN
27 28
IV FAULT SELF-CHECK METHOD
To Next Page
Loading...
