3.4 Replace litter:
①Replace the garbage bag with an empty one (to avoid that the original
one is already full of litters);
②Make sure the rest sand is close to MIN line (to avoid the overflow when
the bin rotates);
➂Long press button "➃" for 2 seconds, the ball bin will rotate clockwise
and start to execute the litter change procedure for about 3 minutes, please
wait patiently for the product to complete the automatic litter change.
➃Replace the garbage bag with an empty one again after clearing litter;
Notice:
①Click“Replace Litter”again to cancel if you click it by mistake or if you find you have forgot to
replace the garbage bag first.
②For fine mineral sand, when to replace the bag(step ①) , to avoid the overflow of mineral sand
from the mouth of the bag, you can firstly press "Clean" for 2 seconds; then the litter bin will
rotate 90° counterclockwise to ensure that the mouth of the bag is upward when replacing.
After bag replacement, repeat③and ④.
AUTO
FULL
1 4
32
AUTO
FULL
1 4
32
Long press for 2 seconds to start the
waste bag change mode immediately.
EN EN
17 18
To Next Page
Loading...
