All operating instructions must be read and understood before the product is operated.
These safety and operating instructions must be kept in safe place for future reference.
All warnings on the product and in the instructions must be observed closely.
All operating instructions must be followed.
Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
This product must be operated on a power source specied on the specication label. If you are
not sure of the type of power supply used in your home, consult your dealer or local power
company. For units designed to operate on batteries or another power source, refer to the
operating instructions.
The power cords must be routed properly to prevent people from stepping on them or objects
from resting on them. Check the cords at the plugs and product.
In case of using DC adapter instead of AC adapter, which is provided, please check the proper load
capacity (or current capacity) and use a adapter that provide stable voltage.
Do not overload AC outlets or extension cords. Overloading can cause re or electric shock.
Never insert an object into the product through vents or openings. High voltage ows in the
product, and inserting an object can cause electric shock and/or short internal parts. For the same
reason, do not spill water or liquid on the product.
Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other dangerous conditions. Request a qualied service person to perform servicing.
If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a
qualied service person to perform repairs.
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions.
Improper adjustment of controls not described in the instructions can cause damage,
which often requires extensive adjustment work by a qualied technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the
product indicates that the product needs servicing.
To Next Page
Loading...
Need help?
General
