TVLogic LVM-071W User Manual

Features
LVM-071W/091W SERIES MONITORS CONTAIN THE FOLLOWING FEATURES:
Compatible with varied SDI signals
- The product is compatible with varied SDI signals - 408i, 576i, 1080i, 1080p, 1080psf
Compatible with varied analog signals
- The product is compatible with varied analog signals – Composite, S-Video, Component, RGB, etc.
Compatible with varied DVI Digital(HDCP)/Analog Signals
- DVI input is standard equipment.
All-in-one type system
- Slim and all-in-one type monitor that requires no other accessories and optimized for space utilization.
Wide Screen / 24Bit RGB Interface Panel
Waveform/Vector Scope/Audio Level Meter function
- Waveform & Vector Scope available for SDI Signals
- Embedded Audio Level Meter available for SDI Signals
Audio in & out
- Built in Audio Disembedder and Internal Speakers
- Stereo Audio out using phone jack
- External Audio in for Mono(071W)/Stereo(091W) Speaker out
Knob Control
- Easy to adjust user conguration using the control knobs.
BLUE ONLY/MONO/Focus-In-Red
H/V delay
Wide Variety of Markers & Safety Areas
- Center Marker, Safety Area Marker, Aspect Marker, Display Size(Scan)
Pixel To Pixel
- Provides both full screen and unscaled native image.
Remote control function
- Remote is controlled simply with a cable connection without any additional peripheral equipment
attached to the unit.
RS422/UMD feature support
- This product supports protocols provided by TVLogic or a TSL protocol.
DC Compatible
- The product is powered by normal DC source.
* LVM-071W : DC12V (LVM-071W), LVM-091W : DC12V/24V (LVM-091W)
Additional features
- Active Loop Through/SDI , , VESA Mounting Standard, 350 cd/m2 brightness, 700:1(LVM-071W)
350:1(LVM-091W) contrast ratio, OSD user interface, Rack Mountable
Multi Format LCD Monitor
06

TVLogic LVM-071W Specifications

General

Brand	TVLogic
Model	LVM-071W
Category	Monitor
Language	English