TVS electronics BS-L100 Plus - RS-232 Interface; Baud Rate; Parity Check; Stop Bit

Handheld Laser Barcode Scanner - BS-L100 Plus
5
RS-232 Interface
Baud Rate
When the scanner is connected to a host device through its RS-232 interface, you need to set
communication parameters (including baud rate) to match the host device. Baud rate is the number
of bits of data transmitted per second. Set the scanner’s baud rate to match the Host requirements.
000701
RS232 600bps
000702
Rs232 1200bps
000703
Rs232 2400bps
000704
Rs232 4800bps
000705
Rs232 9600bps
Factory Fault
000706
RS232 19200bps
000707
Rs232 38400bps
000708
Rs232 57600bps
000709
Rs232 115200bps
001200
RS232 No Parity
001201
RS232 XON/OFF
Protocol
001202
RS232 RTS/CTS
Protocol
0013020
RS232 Handshake
Timeout 2s
0013050
RS232 Handshake
Timeout 5s
Parity Check
001000
RS232 No Parity
001001
RS232 Odd Parity