To Next Page
G
Gavin HallAug 5, 2025
How to free up memory on my TVS LP 46 PLUS Printer (FLASH / DRAM)?
- XxschneiderAug 5, 2025
If your TVS Printer's FLASH/DRAM memory is full, delete any unused files stored in the FLASH/DRAM.
How to free up memory on my TVS LP 46 PLUS Printer (FLASH / DRAM)?
If your TVS Printer's FLASH/DRAM memory is full, delete any unused files stored in the FLASH/DRAM.
What to do if my TVS LP 46 PLUS Printer is not printing?
If your TVS Printer is not printing, it might be due to several reasons. First, ensure the cable is securely connected to the serial, USB interface, or parallel port. If using a serial port, verify the cable pin configuration. Also, check the ribbon and media compatibility and ensure the ribbon is correctly inked. Clean the print head and verify the print density setting. Finally, make sure your program includes a PRINT command at the end of the file and CRLF at the end of each command line.
Overview of the LP 46 Plus bar code printer and its key features.
Lists the standard capabilities and components of the LP 46 Plus printer.
Details optional hardware accessories and configurations available for the printer.
Guide to unpacking the printer and checking the included items for completeness.
Identifies and describes the external components visible from the front of the printer.
Details the internal parts and their locations within the printer for maintenance or setup.
Illustrates and labels the connectors and controls on the rear of the printer for connectivity.
Step-by-step instructions for connecting the printer to a power source and computer.
Instructions on how to load roll labels into the printer for printing.
Guide for installing an optional external roll mount for larger label rolls.
Steps for loading media when the printer's cutter option is used.
Instructions for loading media when the printer's peel-off module is used.
Explains the meaning of different LED colors and patterns for printer status indication.
Describes the basic operations performed by the printer's feed/pause button.
Access special printer functions and configurations via button combinations during power-on.
Instructions for launching and initiating the diagnostic software for printer management.
Details the various functions and settings configurable via the diagnostic tool interface.
Guides on using the diagnostic tool for media sensor calibration.
Lists common printer issues, their possible causes, and recommended recovery procedures.
General