EasyManua.ls Logo

TVS Stryker 125 - Maintenance - Tyre Pressure and Tread; Tyre Pressure Specifications; Tyre Tread Condition Importance

TVS Stryker 125
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
MAINTENANCE
39
5. After adjusting the free play, check and ensure the free
rotation of the wheel by rotating the wheel by hand
when the vehicle is on center stand.
Brake shoe wear indicator
When the brake is applied, the wear index mark (A) on rear
brake cam should be within the range of wear limit indicator
(B) on rear brake panel assembly.
A
B
Incase the mark is going beyond the wear limit, index the
lever to next slot with the help of Dealer to extend shoe life.
WARNING
Replace the brake shoes as a set, if the wear limit indicator shows
beyond the wear limit even after indexing the lever.
TYRES
Tyre pressure:
Check the tyre pressure atleast once in a week if not more
frequently. Insufficient air pressure in the tyres not only
hasten tyre wear, but also seriously affects the stability of
the vehicle. Lower tyre pressure consumes more fuel.
Under inflated tyres make smooth cornering difficult and
over inflated tyres decrease the tyre contact with the
ground which can lead to skidding and loss of control. Be
sure that the tyre pressure is within the specified limit at all
times.
Solo Pillion
Front 1.75 kg/cm² (25 PSI) 1.75 kg/cm² (25 PSI)
Rear 2.25 kg/cm² (32 PSI) 2.53 kg/cm² (36 PSI)
Tyre tread condition
Operating the vehicle with excessively wornout tyres will
decrease riding stability and can lead to loss of control. It is
recommended to replace the tyre when the tyre wears off to
the tyre wear indicator level (indicated by TWI on the tyre).

Table of Contents