TVS X - Page 31

TVS X User Manual - Rev 0 - As on 16 July 2024
29
Wifi - To turn OFF / ON Wifi option
- To list down available Wifi networks,
to connect with them and to search a
new Wifi networks.
4. Vehicle settings Overspeed limit setting - To enable / disable overspeed limit
alert option
Selective regen - To select and set the regen limit
during throttle closure
(Regen refers to regenerative
braking. The electric motor
connected to the wheel generates
power during braking / throttle
releasing which charges the battery
of the vehicle.
There are 5 levels (1 to 5) of regen
limit is available for you to select.
The minimum level generates
less charging power where as the
maximum level generates more.
The regen force assists in braking
and vehicle slows down quickly.
The more regen level provides more
braking effect and the vehicle stops
quicker than normal)
Note
The regenerative braking system may give different feel to the riders who are used
to traditional braking system. The brake levers are often feels softer which is normal.
Light sequence - To alter the vehicle light flashing
sequence scheme while turning ON
the vehicle.
(Presently only one option is available)
Utility box - To unlock the utility box.
Charging port - To unlock the charging port cap.
Hill hold - To enable / disable the hill hold
function refer page no. 35
Change pin - To change the vehicle unlocking pin
Manage cards - -NA-
Service Center profile - A dedicated profile is activated
when the vehicle is handed over to
a service center for maintenance or
servicing