TVS X - Page 41

TVS X User Manual - Rev 0 - As on 16 July 2024
39
RIDING YOUR TVS X
• Begin by retracting the side stand.
• Switch on the vehicle using the
power button.
• Ensure enough charge is available
for the desired distance of riding.
• Engage the motor circuit by turning
the ‘ride/kill switch’ to the ‘ ‘
position.
• Grip any one of the brake lever and
press the ‘ride/kill switch’ to ‘ ‘
and enter the ride mode. Vehicle
enters Xtealth mode by default.
Note:
Make sure your TVS X is fully charged
before beginning your ride to ensure
availability of charge. It is advisable to
charge it to 100% before starting your
journey.
There are several ride modes is available
for you to select during your ride. Refer
page 23 for details.
Warning
The TVS X scooter features a powerful
motor, ensuring quick and responsive
throttle response. It’s advised to
gradually open the throttle until you
become accustomed to the scooter’s
operation.
Given the silent operation of the TVS X,
it might not be immediately apparent
whether the vehicle is in the ‘OFF’ or
‘ON’ state. Pay close attention to the
instrument cluster to conrm that the
motor is turned off until you commence
riding the scooter.