12
8.
About Data Transmission Function
CAUTION
◇ When the history of measured data reaches 100, no further measurements can be taken
unless all 100 records are deleted.
◇ The data transmission function can be set to ON / OFF.
8-1. Introduction
This instrument stores maximum number of 100 measurement data.This instrument is equipped
with NFC（Near Field Communication） technology.Data history can be accessed by bringing
PR-NFC to any Android devices or PC-linked USB NFC Reader/Writer
*
(in conformance to
PC/SC specification).
* Operation tested with SONY USB NFC Reader PaSoRi RC-S380.
Android devices
Laptop or PC + USB NFC Reader/Writer
Example of data history
8-2. How to turn ON/OFF the data transmission function.
nfC
0 n
nfC
0 FF
(2)Press and hold
ZERO button for
approx. 5 seconds.
change the ON or OFF.
button to confirm.
2018/08/17 09:30:45,12.3,20.4
2018/08/17 09:30:50,12.3,20.4
2018/08/17 09:30:55,12.4,20.4
Maximum of 100 measurement results
are recorded with time stamps.
(1)Press the START/OFF button or Press the ZERO Setting button (Example image).
20.4℃
1 2.3
20.4℃
L L L
20.4℃
H H H
20.4℃
F ull
20.4℃
0 0 0
20.4℃
A A A
To Next Page
Loading...
Need help?
General