14
8-5. Data history readout
Android devices
1. Launch NFC Reader (or other NFC tag reading app).
2. Position NFC on Android device to the 'Palette' logo at the center portion of the this
instrument then bring in contact.
* Do not move it.
(Hold for 1 second or more.)
All recorded data stored
in this instrument are
read out.
* NFC position on Android device differs to the move.
* If data history is not read out, bring both in contact and move the one that is over the other device in a forward and back
or left and right in a small motion.
Laptop or PC + USB NFC Reader/Writer
1. Launch ATAGO Logger.
2. Bring the center part (where the 'Palette' logo is) of this instrument in
contact with the NFC mark on the IC card reader/writer.
* Do not move it.
(Hold for 1 second or more.)
All recorded data stored in this
instrument are read out.
* Be sure to establish the PC and IC card reader/writer connection in advance by setting up (and
installing the driver) IC card reader/writer.
* Data history can be read out by holding up the USB NFC Reader/writer to this instrument.
* If data history is not read out, bring both in contact and move the one that is over the other
device in a forward and back or left and right in a small motion.
m Bring this instrument and Android devices or this instrument and USB NFC Reader/writer as close to each other as
possible. (Position it so that the distance between both devices are 5mm or less.)
N Data history can be read out while this instrument is powered off.
N Data history readout will not delete the stored data history.
To Next Page
Loading...
Need help?
General